top of page

Load data for .380 ACP (9mm kurz) + .356 | 120gr | H&N RN KB

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.380 ACP (9mm kurz) + .356 | 120gr | H&N RN KB

Load Specifications

Bullet:
.356 | 120gr | H&N RN KB
Bullet Weight:
120gr | 7.8g
Bullet Diameter:
0.356" | 9.04mm
Bullet Length:
0.577" | 14.7mm
Caliber:
.380 ACP (9mm kurz)
Case Length (l3):
0.681" | 17.3mm
Cartridge Length (C.O.L.):
0.969" | 24.6mm
Seated Depth:
0.289" | 7.3mm
Shank Seated Depth:
0.269" | 6.8mm
Case Capacity:
11.5 Grains of Water | 0.75 cm³
Primer Size:
Small Pistol (SP)
Max. allowed Pressure:
19580 psi | 1350 bar
LID:
LID_B7445_C608

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 62 loads in caliber .380 ACP (9mm kurz) with .356 | 120gr | H&N RN KB bullet and 31 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 70N
<<locked>>
84%
16476
84%
**3
94%
ADI APS 450
<<locked>>
72%
14837
76%
**5
100%
ADI AS 30
<<locked>>
87%
16549
84%
**4
100%
ADI AS 50N
<<locked>>
84%
15693
80%
**7
97%
Accurate Solo 1000
<<locked>>
81%
15925
81%
**1
98%
Accurate Solo 1250
<<locked>>
94%
15316
78%
**7
91%
[Alliant BULLSEYE]*
<<locked>>
79%
15302
78%
**1
84%
Baschieri & Pellagri 100
<<locked>>
88%
15447
79%
**8
95%
Hodgdon Clays
<<locked>>
70%
15461
79%
**9
100%
Hodgdon HP38
<<locked>>
67%
16766
86%
**4
95%
Hodgdon Universal
<<locked>>
93%
16476
84%
**3
94%
Lovex S011
<<locked>>
72%
15606
80%
**4
92%
[Lovex S020]*
<<locked>>
91%
15925
81%
**3
87%
Maxam CSB 1
<<locked>>
95%
14083
72%
**1
90%
Maxam CSB 2
<<locked>>
92%
10631
54%
**8
93%
Maxam CSB 3
<<locked>>
91%
15780
81%
**4
96%
Maxam CSB 4
<<locked>>
86%
15664
80%
**7
98%
Maxam CSB 5
<<locked>>
83%
16433
84%
**7
100%
Ramshot Zip
<<locked>>
67%
15983
82%
**4
93%
ReloadSwiss RS 12 👍
<<locked>>
95%
16085
82%
**6
100%
Rottweil P 801 👍
<<locked>>
85%
16665
85%
**9
100%
[SNPE Vectan BA 9]*
<<locked>>
86%
16563
85%
**1
89%
SNPE Vectan BA10
<<locked>>
67%
14823
76%
**5
100%
SNPE Vectan BA9 1/2
<<locked>>
93%
16926
86%
**7
92%
[Somchem MP200]*
<<locked>>
92%
16940
87%
**3
83%
[Somchem MS200]*
<<locked>>
92%
15795
81%
**1
85%
Vihtavuori N310
<<locked>>
71%
15838
81%
**1
100%
Vihtavuori N320
<<locked>>
89%
15432
79%
**0
98%
Vihtavuori N330
<<locked>>
92%
14562
74%
**7
92%
[Vihtavuori N340]*
<<locked>>
96%
15737
80%
**7
84%
Winchester 231
<<locked>>
74%
15983
82%
**4
93%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AP 70N]*
<<locked>>
63%
8702
44%
**9
83%
ADI APS 450
<<locked>>
65%
12314
63%
**9
100%
ADI AS 30
<<locked>>
73%
11458
59%
**6
98%
ADI AS 50N
<<locked>>
71%
11182
57%
**2
93%
Accurate Solo 1000
<<locked>>
68%
11095
57%
**3
93%
[Accurate Solo 1250]*
<<locked>>
81%
11023
56%
**2
85%
[Alliant BULLSEYE]*
<<locked>>
73%
13097
67%
**1
81%
Baschieri & Pellagri 100
<<locked>>
75%
10965
56%
**6
91%
Hodgdon Clays
<<locked>>
63%
12575
64%
**3
100%
Hodgdon HP38
<<locked>>
63%
14475
74%
**4
93%
[Hodgdon Universal]*
<<locked>>
70%
8702
44%
**9
83%
[Lovex S011]*
<<locked>>
61%
11110
57%
**3
87%
[Lovex S020]*
<<locked>>
81%
11618
59%
**8
81%
[Maxam CSB 1]*
<<locked>>
82%
10240
52%
**6
84%
[Maxam CSB 2]*
<<locked>>
80%
7876
40%
**6
87%
[Maxam CSB 3]*
<<locked>>
71%
9384
48%
**3
88%
Maxam CSB 4
<<locked>>
73%
10936
56%
**9
94%
Maxam CSB 5
<<locked>>
69%
11284
58%
**5
100%
Ramshot Zip
<<locked>>
62%
13634
70%
**8
91%
[ReloadSwiss RS 12]*
<<locked>>
67%
6962
36%
**9
89%
Rottweil P 801
<<locked>>
64%
8238
42%
**2
95%
[SNPE Vectan BA 9]*
<<locked>>
70%
10689
55%
**6
81%
SNPE Vectan BA10
<<locked>>
60%
12299
63%
**9
100%
[SNPE Vectan BA9 1/2]*
<<locked>>
75%
10689
55%
**6
84%
[Somchem MP200]*
<<locked>>
86%
14779
75%
**1
80%
[Somchem MS200]*
<<locked>>
86%
13721
70%
**8
82%
[Vihtavuori N310]²
<<locked>>
58%
10182
52%
**2
100%
Vihtavuori N320
<<locked>>
70%
8963
46%
**3
91%
[Vihtavuori N330]*
<<locked>>
75%
9094
46%
**6
82%
[Vihtavuori N340]*
<<locked>>
90%
13518
69%
**8
81%
[Winchester 231]*²
<<locked>>
59%
9906
51%
**9
85%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page